From wikistone
Text Dump
Monitor all traffic on port 25:
tcpdump -vv -X -s 1500 -i eth1 port 25
- -vv : More verbose output
- -x : When parsing and printing, in addition to printing the headers of each packet, print the data of each packet.
- -X : When parsing and printing, in addition to printing the headers of each packet, print the data of each packet (minus its link level header) in hex and ASCII. This is very handy for analysing new protocols.
- -s : 1500: Snarf snaplen bytes of data from each packet rather than the default of 68. This is useful to see lots of information.
- -i : eth1 : Monitor eth1 interface
- src [net] : source host / network(CIDR)
- dst [net] : destination host / network(CIDR)
File Dump
tcpdump -i [interface] -s 0 -w [file] src net a.b.c.d/24
- -s : bytes per packet to capture, default is 68 L3 bytes (96 L2), set to 0 to get all bytes in the packet