From wikistone
OSPF: Open Shortest Path First
Link State routing protocol.
Uses Dijkstra's SPF (Shortest Path First) algorithm.
Tables:
- Neighbor
- Topology
- Route
Notes:
- All areas connect to area 0.
- All routers in an area know about all other routers in that area.
- Area 0 is aka Backbone area.
- Neighborships form in same area only.
- Hellos:
- 10 sec on broadcast & P2P networks
- 30 sec on NBMA networks
- Timeout 4x Hello
- Reliability: Uses RTP (Reliable Transport Protocol) for reliability. This is built into OSPF.
Router Types:
- ABR: Area Border Router. Must have 1 int in area 0. Can summarize here only.
- ASBR: Autonomous System Boundary Router. Links the OSPF AS to external network(s).
LSA Types: (Link State Adverts)
- ...
Packets:
- Hello
- RID, Router Priority, Neighbors, BR & BDR addresses
- (Must match for neighborship formation.) Area #, Hello & Dead timers, NetMask, Auth
Neighborship:
- RID (Router ID) is determined.
- Staticly declared or determined by: highest active IP when OSPF starts (loopback > physical).
- RID is 32 bit in IPv4 format.
- If dynamic RID, RID will only change if OSPF is manually restarted or at router reload.
- If Hello contains This router, This knows neighborship is formed. If Hello doesn't contain This, This attempts to form neighborship.
- States:
- Init State: received Hello (if no Hello matches, Init -> Down).
- 2-Way State: This router listed in Other's Hello & Other router listed in This' Hello. (DROthers stay here)
- ExStart State: Master-Slave determined by Priority > RID. Master sends DB Desc (DBD) packet (summary of Link-State db). Slave sends DBD.
- Loading State: Ack DBDs.
- Slave Req details (Link-State Requests [LSR])
- Master Tx updates (Link-State Updates [LSU])
- Master Req details (LSR)
- Slave Tx updates (LSU)
- Full State: Neighborship formed.
- Roles:
- DR (Designated Router)
- updates are sent to DR on 224.0.0.6
- DR calculates changes, then sends update on 224.0.0.5
- determined by Rtr Priority > RID
- BDR (Backup Designated Router)
- takes over as DR if DR fails.
- DROther (all other routers on network segment or routers on P2P)
- DR (Designated Router)
- Link-State packets:
- LSU (Link-Stake Update). Encapsulating packet for updates. Contain LSAs.
- LSA (Link-State Advert). Individual updates about routes to networks.
- LSAck (Link-State Ack). Acks for reliability. (RTP)
Routes:
- Standard: AD: xxx
- InterArea:
- E1: AD: xxx. Cost: xxx. Metric increments as the route traverses the AS.
- E2: AD: xxx. Cost: 200. Metric does not increment across AS.
Cost: 100 / (BW-inMBps). All speeds above 100 MBps are 1... Unless you adjust the factor.
Commands:
Clear OSPF: # clear ip ospf process Show OSPF db: # sh ip ospf database
.