From wikistone
| Line 1: | Line 1: | ||
| − | == | + | ==TCPDump== |
Monitor all traffic on port 25: | Monitor all traffic on port 25: | ||
| − | |||
* -vv : More verbose output | * -vv : More verbose output | ||
* -x : When parsing and printing, in addition to printing the headers of each packet, print the data of each packet. | * -x : When parsing and printing, in addition to printing the headers of each packet, print the data of each packet. | ||
| Line 8: | Line 7: | ||
* -s : 0: Snarf up to snaplen bytes of data from each packet rather than the default of 68, 0 is no size limit. This is useful to see lots of information. | * -s : 0: Snarf up to snaplen bytes of data from each packet rather than the default of 68, 0 is no size limit. This is useful to see lots of information. | ||
* -i : eth1 : Monitor eth1 interface | * -i : eth1 : Monitor eth1 interface | ||
| + | * -C : pcap files rotate every n size in MB | ||
| + | * -G : pcap files rotate every n sec | ||
| + | * -W : rotate n files | ||
| + | * -K : don't verify checksums | ||
* src [net] : source host / network(CIDR) | * src [net] : source host / network(CIDR) | ||
* dst [net] : destination host / network(CIDR) | * dst [net] : destination host / network(CIDR) | ||
| + | * net : network(CIDR) (will filter src or dest) | ||
| + | |||
| + | ==Text Dump== | ||
| + | tcpdump -vv -X -s 1500 -i eth1 port 25 | ||
==File Dump== | ==File Dump== | ||
| − | tcpdump -i [interface] -s 0 -w [file] | + | tcpdump -i [interface] -s 0 -K -w [file] net a.b.c.d/24 |
| − | |||
Revision as of 19:39, 12 August 2017
TCPDump
Monitor all traffic on port 25:
- -vv : More verbose output
- -x : When parsing and printing, in addition to printing the headers of each packet, print the data of each packet.
- -X : When parsing and printing, in addition to printing the headers of each packet, print the data of each packet (minus its link level header) in hex and ASCII. This is very handy for analysing new protocols.
- -s : 0: Snarf up to snaplen bytes of data from each packet rather than the default of 68, 0 is no size limit. This is useful to see lots of information.
- -i : eth1 : Monitor eth1 interface
- -C : pcap files rotate every n size in MB
- -G : pcap files rotate every n sec
- -W : rotate n files
- -K : don't verify checksums
- src [net] : source host / network(CIDR)
- dst [net] : destination host / network(CIDR)
- net : network(CIDR) (will filter src or dest)
Text Dump
tcpdump -vv -X -s 1500 -i eth1 port 25
File Dump
tcpdump -i [interface] -s 0 -K -w [file] net a.b.c.d/24