From wikistone
| Line 11: | Line 11: | ||
<pre> | <pre> | ||
post-up ip route add default via [eth0_gw] table table0 | post-up ip route add default via [eth0_gw] table table0 | ||
| − | post-up ip rule add from [ | + | post-up ip rule add from [eth0_network/cidr] lookup admin |
post-up ip route add default via [eth1_gw] table table1 | post-up ip route add default via [eth1_gw] table table1 | ||
| − | post-up ip rule add from [ | + | post-up ip rule add from [eth1_network/cidr] lookup exede |
| + | </pre> | ||
| + | |||
| + | Example: | ||
| + | <pre> | ||
| + | auto eth0 # network 10.0.0.0 | ||
| + | iface eth0 inet dhcp | ||
| + | |||
| + | auto eth1 # network 10.0.1.0 | ||
| + | iface eth1 inet dhcp | ||
| + | |||
| + | post-up ip route add default via 10.0.0.1 table admin | ||
| + | post-up ip rule add from 10.0.0.0/24 lookup admin | ||
| + | post-up ip route add default via 10.0.1.1 table exede | ||
| + | post-up ip rule add from 10.0.1.0/24 lookup exede | ||
</pre> | </pre> | ||
Revision as of 12:11, 20 April 2014
Debian
Assuming two interfaces (eth0 and eth1) on different subnets.
Add tables to /etc/iptables2/rt_tables
# echo "table0" >> /etc/iptables2/rt_tables # echo "table1" >> /etc/iptables2/rt_tables
Add rules to /etc/network/interfaces
post-up ip route add default via [eth0_gw] table table0 post-up ip rule add from [eth0_network/cidr] lookup admin post-up ip route add default via [eth1_gw] table table1 post-up ip rule add from [eth1_network/cidr] lookup exede
Example:
auto eth0 # network 10.0.0.0 iface eth0 inet dhcp auto eth1 # network 10.0.1.0 iface eth1 inet dhcp post-up ip route add default via 10.0.0.1 table admin post-up ip rule add from 10.0.0.0/24 lookup admin post-up ip route add default via 10.0.1.1 table exede post-up ip rule add from 10.0.1.0/24 lookup exede